CD-203/204/DPF-R3010/R3010E/R4010/R4010E
4
CIRCUIT DESCRIPTION
Step
Key name
Display
Description
1
PLAY/PAUSE
(Cyclic)
03
(1) Focus servo ..........................................................................ON
TE-B adjustment
(2) Tracking servo ......................................................................OFF
(3) Feed servo ............................................................................OFF
05
(1) Focus servo ..........................................................................ON
F-GAIN/T-GAIN
FE-B adjustment
(2) Tracking servo ......................................................................ON
(3) Feed servo ............................................................................ON
2
UP
Display goes on
3
DOWN
Display goes off
4
DISC1
Search the position of No. 1
5
STOP
00
(1) Focus servo ..........................................................................OFF
Waiting key input
(2) Tracking servo ......................................................................OFF
(3) Feed servo ............................................................................OFF
6
DISC2
-
Canceled Test mode
Normal mode
7
DISC3
01
Canceled Test mode, then 01 PLAY
Normal mode
2. Test mode
2-1. Setting the test mode
¶
The microprocessor built in the unit can be put to TEST
MODE by just pressing the TIME DISP. key when set to
power on.
¶
DP-R series is available to set to each test mode by each
key.
2-2. Key vs Function in test mode
CD-203/DPF-R3010(K)
COVER(
98.4.24
11:30
PM
y [ W
7
