5
6
key
A Filler cap
B Lid
C Goblet
D Gasket
E Blade set
F Operating dial (
- 0 -1 - 2)
G Motor unit
H Coffe grinder container (if available)
I Gasket
L Coffe grinder blade (if available)
M Multimill blade
N Gasket
O Multimill container
how to operate
warning:
Even when not in use, unplug
the appliance before mounting or
removing the single parts or before
cleaning.
warning:
Prepare the container with the food
to mix and put it on the motor body
before plugging the appliance in.
l
Insert the gasket on the blade set
(E); by holding it with the handle,
put the blade set (E) on the bottom
of the container base. Fix the
blade set (E) by rotating it counter-
clockwise to lock it (Fig. 2).
l
Position the goblet (C) on motor
body (G) properly and rotate it
clockwise to lock it (Fig. 3).
l
Cut food into small pieces and
place them into the container in an
amount which doesn’t exceed the
maximum level.
l
Add the liquid. Close the goblet (C)
with the lid (B) (Fig. 4).
note
:
The correct ratio is 2 parts of food
and 3 parts of liquid for a max time of
30 seconds.
l
Close the upper hole of the lid (B)
by inserting the apposite filler cap
(A) by rotating it clockwise (Fig. 5).
l
Plug power cord into a socket.
l
Start the appliance by turning the
on dial (F) clockwise as far as the
first (low speed) or the second
(high speed) notch to start the
blades.
By rotating the dial (F) counter-
clockwise, the PULSE function is
enabled (
).
l
To stop the operation, turn the
operating dial (F) to «0».
warning:
If the appliance should fail to start,
make sure that the goblet is correctly
fitted. The appliance is fitted with
devices to prevent it from operating if
the goblet is not fitted or if it has been
fitted incorrectly.
warning:
Do not exceed the max. operating
time of 30 seconds.
l
Never remove the lid (B) whilst
using.
warning:
Before mixing warm liquids, always
remove the filler cap (A) from the
blender lid.
warning:
Do not exceed the max operating
time of 30 seconds. The best use is
with short pulses for few seconds.
l
During use, it is possible to add
foods into the container, by lifting
out the filler cap (A) after having
switched off the appliance.
