Use the centrifugal juicer for
extracting juice from fruit and
vegetables.
before using your Kenwood
attachment
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Do not use the juicer if the
filter is damaged.
●
The cutting blades on the base of
the filter are very sharp, take care
when handling and cleaning the filter.
●
Only use the pusher supplied. Never
put your fingers in the feed tube.
Unplug before unblocking the feed
tube.
●
Before removing the lid, switch off
and wait for the filter to stop.
●
Switch off and unplug:
●
●
before fitting or removing parts
●
●
before cleaning
●
●
after use.
●
Don't touch moving parts.
●
This machine will be damaged and
may cause injury if the interlock
mechanism is subjected to
excessive force.
●
Do not use the lid to operate the
attachment, always use the on/off
speed control.
●
Should excessive vibration occur
when using this attachment, either
adjust the speed or stop the
machine, unplug and clear any
blockage.
Refer to your main kitchen machine
instruction book for additional safety
warnings.
before using for the first time
●
Wash the parts: see 'Cleaning'.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
햲
pusher
햳
lid
햴
lid interlock tab
햵
filter
햶
pulp container
햷
juice outlet
햸
pulp container release lever
햹
base unit
햺
beaker
햻
beaker holder
to use your centrifugal
juicer
preparing food
●
Remove stones (plums, peaches,
cherries etc).
●
Remove tough skins (melons,
pineapples, cucumbers, potatoes
etc).
●
Soft-skinned and other foods just
need washing (apples, pears,
carrots, radishes, lettuce, cabbage,
parsley, spinach, grapes,
strawberries, celery etc).
●
Citrus peel - Peel and remove the
white pith, otherwise the juice may
be bitter. For best results we
recommend using the citrus juice
attachment which is available
separately.
●
Remove high speed outlet cover
before assembling unit.
assembly and use
1 Place the pulp container onto the
base unit and turn clockwise until it
locks into position. When correctly
fitted the spout should be located
over the pulp container release lever.
2 Fit the filter and push firmly into
position.
3 Fit the lid into the pulp container with
the interlock tab next to the arm of
the base unit. Then turn clockwise
until the interlock tab on the lid fits
into the groove in the upright arm of
the base unit. When correctly fitted
the markings should align .
English
2
햲
햳
햵
햶
햷
햴
햸
햹
햺
햻
