manualshive.com logo in svg

Kenwood 8015, Instruction Manual

Share
Download
Kenwood 8015 Instruction Manual Download Page 49

— 49 —

FM tuner section

Frequency Range (200 kHz Space) ...................87.9 – 107.9 MHz
Usable Sensitivity (S/N: 30dB) .....................9.3 dBf (0.8 µV/75 

Ω

)

Quieting Sensitivity (S/N: 50dB) ................15.2 dBf (1.6 µV/75 

Ω

)

Frequency Response (±3.0dB)..............................30 Hz – 15 kHz
Signal to Noise ratio  .............................................70 dB (MONO)
Selectivity.......................................................

≥

80 dB (±400 kHz)

Stereo Separation ....................................................40 dB (1 kHz)

AM tuner section

Frequency Range (10 kHz space) .........................530 – 1700 kHz
Usable Sensitivity (S/N: 20 dB)..............................28 dBµ (25 µV)

CD player section

Laser diode ....................................................GaAlAs (

λ

=780 nm)

Digital filter (D/A) .....................................8 Times Over Sampling
D/A Converter .......................................................................1 Bit
Spindle speed ..............................................500 – 200 rpm (CLV)
Wow & Flutter........................................Below Measurable Limit
Frequency response (±1 dB).................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio (KDC-X715) ...........................105 dB (1 kHz)

Signal to Noise ratio 

(KDC-8015/715S) ....................93 dB (1 kHz)

Dynamic range (KDC-X715) ...............................................100 dB

Dynamic range 

(KDC-8015/715S) ........................................93 dB

Channel separation (KDC-X715) ...........................................95 dB

Channel separation 

(KDC-8015/715S) ..................................85 dB

Audio section

Preout Level(mV)/Load (during CD play)

(KDC-X715/8015) ........................................4500 mV/10 k

Ω

(KDC-715S) .................................................1800 mV/10 k

Ω

Preout Impedance

(KDC-X715/8015) .........................................................80 

Ω

(KDC-715S) ..............................................................

≤

600 

Ω

Maximum output power .................................................45 W x 4
Full Bandwidth Power (at less than 1% THD) ................22 W x 4
Tone action

Bass ............................................................100 Hz ±10 dB
Treble ..........................................................10 kHz ±10 dB

General

Operating voltage (11 - 16V allowable) ...............................14.4 V
Current Consumption ............................................................10 A 
Installation Size  (W x H x D) .........................182 x 53 x 162 mm 

...................................................

7-3/16 x 2-1/16 x 6-3/8 in.

Weight ..................................................................4.2 lbs (1.9 kg)

Specifications subject to change without notice.

Specifications

KDC-X715_U.S_r9  00.12.26 3:48 PM  Page 49

Summary of Contents for 8015





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands