EN
G
LIS
H
3
tor gauge. If the automatic safety cut-out has operated, switch the
appliance off, disconnect from the power outlet and allow the appli-
ance to cool down for 5-10 minutes. Refill with water and switch on
again. The appliance will work as normal.
PRODUCT DESCRIPTION
1. Lid / 2. Lid open button
3. Handle folding lever
4. Handle / 5. Spout
6. MAX level / 7.Silicon body
8. MIN level / 9. Plastic body
10.Off button / 11. On button
12. Cord with plug
MAINTENANCE
Attention! When kettle use
do not slide the lever on
handle downwards to avoid
the handle sliding. This may
bring to accidents.
1. Open the lid by pressing the lid open button and fill the appliance with
water to desired level. Do not fill with water less than 0.2 L - minimum
capacity to prevent the kettle running dry while operating. Do not fill with
water more than 0.8 L - maximum capacity to avoid water spilling. Wipe
up the outer surface of the appliance if it is wet. Close the lid until click.
2. Put the appliance on the dry, smooth, horizontal, heat resistant surface.
Plug the power cord to the mains. Press the on button “I”. The lighting
around the button will be on. 3. After the water boiling, the appliance
will stop working automatically; the lighting around the button will be off.
- If you want to stop the boiling process, press the off button “O”.
-
If you want to boil water again after the boiling has finished you
need to wait for some minutes to cool down the thermostat or for
faster result you need to unplug the kettle, pour the hot water out,
pour in the cold water, attach the cord to mains and press the on
“I”
button to on the appliance again.
Summary of Contents for H-121
