Kentrox q2200, Setup Manual

Page: 10 / 22

10
Before you begin
DNS
Set the primary and the secondary DNS server addresses on the
Configure > Router
> DNS Client
page. Also set the DNS search domain name.
❏
Primary DNS server _____._____._____._____ 0.0.0.0
❏
Secondary DNS server _____._____._____._____ 0.0.0.0
❏
DNS Search Domain _____________________ <blank>
NOTE
Only one DNS server can be entered at a time. Always enter the IP address of the
primary DNS server first, the secondary DNS server second, and so forth.
Default Gateway
To set the default gateway and the IP interface, go to the
Default Route
section of the
Configure > Router > Routes
page, and select
Add
.
❏
Gateway IP Address _____._____._____._____ 0.0.0.0
❏
Gateway Interface ‰ iplan ‰ ipwan <blank>
Administrative password
The default user name when logging into the router is “admin.” No default password
is assigned to this user. The password should be set to restrict access to authorized
users. To enter a new password, go to
Configure > System > Users
and click
Password in the table.
The password may be up to 16 characters long and consist of letters, digits, and any
of the following characters: `~!@#$%^&*()_+-={}[]:;<>?,./
❏
Password _____________________ <blank>
Date and Time
The router can derive the date and time automatically by polling SNTP servers, or
you can enter the date and time manually.
To set up automatic polling of SNTP servers, navigate to the
Configure > System >
Time > SNTP Server
page, and click add to identify each SNTP server the router
will poll. Enter the following:
❏
SNTP server _____._____._____._____ 0.0.0.0
Otherwise, navigate to the
Configure > System > Time > Set Date and Time
page to
set the router’s clock manually.
Remote access (optional)
If the network administrator requires remote management access to the router from
the WAN or via the optional modem, set the parameters as required in the untrusted
section of the
Configure > System > Management Access
page.