Rev
F
: 01/2015
3 PHASE – DIFFERENT MOTOR AND CONTROL VOLTAGE, with ATD
NOTES:
5. DO NOT ATTEMPT OR MAKE RAPAIRS ON THE MACHINE WHILE POWER IS ON.
6. ALL ELECTRICAL WORK MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN.
7. THE ELECTRICAL DIAGRAM SHOWS THE MACHINE IN THE “OFF” POSITION.
8. THE GROUND WIRE (GREEN) OF THE POWER CABLE IS CONNECTED TO THE FRAME
OF THE MACHINE.
To obtain the correct Kentmaster part number for 3-pole contactor and overload
relay, please contact the Kentmaster representative.
Figure
19
WIRING DIAGRAM – different control and motor voltage, with ATD
Page 20 of 26
L
N
