REVB: 06/13
MOTOR DISASSEMBLY AND REASSEMBLY
1. REMOVE 4 SCREWS (#920905, FIG. 2) BETWEEN NOSE (#662310) AND MOTOR SHELL (#662311)
2. DISCONNECT 2 CONNECTORS (#662334).
3. REMOVE SCREWS (#921108 AND #921120) AND HANDLE BRACKET (#662322 AND #662321)
4. SLIDE OUT MOTOR (768125), REMOVE COUPLING (#662314) AND KEY (#860655) ON MOTOR SIDE
5. CLEAN AND LUBRICATE ALL PARTS PRIOR TO REASSEMBLY. REASSEMBLE PARTS IN REVERSE ORDER
6.
INSPECT O-RINGS (#768125) FOR ANY CUTS AO FLAT SPOTS. (THESE CAN CAUSE LEAKS) REPLACE
PARTS AS NEEDED.
SAW MANDREL DISASSEMBLY
1. REMOVE SAW BLADE. (SEE FIGURE 1 – BLADE REPLACMENT)
2. REMOVE BLADE GUARD
3. REMOVE FOUR SCREWS (ITEM 924105, FIG. 2)
4. REMOVE PLUG (ITEM 630077, FIG. 2). WITH ACENTER PUNCH INSERTED THRU HOLE PLUGGED WITH PLUG,
PRESS OUT MANDREL (ITEM 662025, FIG. 2) AND ALL OTHER INTERNAL PARTS.
5. LOOSEN SCREW (ITEM 931103, FIG. 2)
6. REMOVE RETAINER (ITEM 662319, FIG. 2)
7. THRU BORE THAT HOUSES MANDREL, PUSH PINION (ITEM 662313, FIG. 7) OUT BACK.
SAW MANDREL REASSEMBLY
1. CLEAN AND LUBRICATE ALL PARTS PRIOR TO ASSEMBLY
2. SHARPEN OR REPLACBLADE AS NEEDED
3. REASSEMBLE PARTS IN REVERSE ORDER
4. FILL WITH GREASE (KENTMASTER GREASE – 7903070) AT FITTING (ITEM 7018220, FIG. 2) BEFORE
USING TOOL
POWER UNIT:
–
Use with Kentmaster Power Unit HPP-2-B (#6516010) with bleeding line on return
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016
UNITED STATES OF AMERICA
TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
Page 7 of 14
