REV F: 30/12/05
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016
UNITED STATES OF AMERICA
TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
7 OF 43
•
CHANGE SAW BLADE. BLADE MAY BE DEFECTIVE.
•
REMOVE BLADE FROM MACHINE. BACK OFF SCREW, ITEM 6, WITH TORQUE
WRENCH. GRAB TAKE-UP WHEEL WITH
BOTH
HANDS AND SLIDE BACK AND
MOTOR PULLS EXCESSIVE
FORTH. IT SHOULD SLIDE FREELY. IF IT BINDS OR TAKES EXCESSIVE EFFORT,
AMPERAGE (WITHOUT LOAD)
DISASSEMBLE COMPLETELY. CHECK TO SEE IF GIBS LOCATED ON EACH SIDE
OR
OF SLIDE ARE TOO CLOSE AND TIGHT AGAINST SLIDE. LOOSEN SCREWS THAT
BLADE IS TOO LOOSE WHILE
HOLD GIB IN PLACE. SPREAD GIBS SLIGHTLY OUT AND RETIGHTEN SCREWS.
TORQUE WRENCH IS
SLIDE SHOULD MOVE BACK AND FORTH FREELY, BUT WITHOUT UP AND DOWN
PROPERLY CALIBRATED
PLAY. REASSEMBLE AND TEST MACHINE. LUBRICATE SURFACES BETWEEN
SLIDE AND GIB.
________________________________________________________________________________________________________
SERVICE
1.
KEEP GOOD RECORDS OF ALL SERVICE ACTIVITY AND INCLUDE TOOL IN PREVENTIVE MAINTENANCE PROGRAM.
2.
USE ONLY GENUINE KENTMASTER REPLACEMENT PARTS TO ASSURE PROPER PERFORMANCE OF TOOL.
3.
CONTACT THE KENTMASTER SUPPLIER NEAREST YOU FOR PARTS
AND CUSTOMER SERVICE INFORMATION.
PARTS BOOK
MODELS MAIN ASSEMBLIES
