10. Smart Metering - Introduction
Thank you very much for purchasing a KENTIX energy monitoring solution based on the KENTIX
PowerManager.
10.1. Product features
The KENTIX PowerManager is the central component of the solution. Online SmartMeter and InlineMeter as
well as alternatively via serial interface (RS485) a Power Analyser and electricity meter can be connected.
The PowerManager is connected to the network via a PoE-enabled switch.
The web interface can then be used to change the basic settings, such as IP data and user configuration, as
well as the configuration of all measuring devices (SmartMeter).
A description of the configuration can be found later in this guide.
10.2. Application areas
• Industry
• Hospitals
• Telecommunication
• Energy and water supplier
• Data centers
10.3. Safety instructions
Installation
In order to ensure the safety and integrity of the operator as well as the correct operation of KENTIX Smart
Metering components, the installation must be carried out by a competent person. In addition, it must also
comply with the relevant regulations.
Environment
The location of the installation must be such that the PowerManager and SmartMeter and all associated cables
are not affected by the following environmental factors:
Dust, moisture, excessive heat; direct sunlight; Heat sources; Devices that generate strong electromagnetic
fields; Liquids or corrosive chemicals.
Please observe the ambient conditions given in the technical data.
Degree of protection
When installing PowerManager and SmartMeter, certain degrees of protection must be guaranteed. Observe
the relevant regulations for installations in specific environments such as in industry or data center.
Page
(07-2018, subject to change)
kentix.com
92
Sm
a
rt
A
c
c
e
s
s
