Introduction
Man-1170EN Rev.01
Additional Boards Installation Manual
Introduction
This manual describes the Taktis Fire Control Panel Additional Boards.
This section describes:
•
Using This Manual
•
Related Documentation
•
If You Need Help
•
Contacting Kentec Electronics
Using This Manual
The following sections provide instructions for installing, testing and troubleshooting the Taktis Fire Alarm Control
Panel Boards:
Related Documentation
The following documents shall be used to provide additional information for installing the Taktis Fire Alarm Control
Panel additional boards:
•
Fire Control User Manual – Man-1169
•
Fire Control Panel Installation Manual – Man-1154
•
I/O Card Installation Instructions – Man-1395
•
LE2 Software – Man-TBC
Additional Board Part Numbers
The table below shows part numbers associated with the Additional Boards:
Section A: Preface
Provides document conventions.
Section 1: Overview
Provides a summary of Additional Board features.
Section 2: Installation
Describes how to install and set up Additional Boards.
Section 3: Addressing
Describes how to set the Additional board binary address.
Section 4: 16 Channel I/O board
Describes PCB layout, board indications & cable connections
Section 5: 8-Way Relay board
Describes PCB layout, board indications & cable connections
Section 6: 8-Way Conventional board
Describes PCB layout, board indications & cable connections
Section 7: 4-Way Sounder board
Describes PCB layout, board indications & cable connections
Appendix A: Specifications
Provides characteristics of the additional boards.
Appendix B: Battery Consumption
Provides Additional boards battery consumption calculations.
Model Name
Part Number
16 Channel I/O Board
K772
8-Way Relay Board
K791
8-Way Conventional Board
K792
4-Way Sounder Board
K793
