5
Man-1572
DNP-R-2F/FC-K
Safety Control Drawing
Position
Description
Input / Output values
1
RX
–
LC connector interface for fibre - PORT B
Data rate: 100 Mb/s
–
125 MBd.
Fibre drive distance:
M: Multi-mode - up to 2km
S: Single-mode
–
10 / 15 / 20 /
40 / 80km variants
M: 850nm / 1310nm
S: 1310 / 1550nm
BiDi: 1310 & 1550nm
2
TX
–
LC connector interface for fibre - PORT B
3
RX
–
LC connector interface for fibre - PORT C
4
TX
–
LC connector interface for fibre - PORT C
5
Screen/Shield RS-485 - PORT B or C
Umax = ± 5Vpk
Imax = ± 60 mA
Data rate:
4.8 to 115.2 kbit/s
6
In / Out / + line RS-485 - PORT B or C
7
In / Out / - line RS-485 - PORT B or C
8
Screen/Shield RS-485 - PORT A1 (Panel IN Port)
9
In / Out / + line RS-485 - PORT A1 (Panel IN Port)
10
In / Out / - line RS-485 - PORT A1 (Panel IN Port)
11
Screen/Shield RS-485 - PORT A2 (Panel OUT Port)
12
In / Out / + line RS-485 - PORT A2 (Panel OUT Port)
13
In / Out / - line RS-485 - PORT A2 (Panel OUT Port)
Table 3
DNP R-2F Configuration
DNP R-2FC Configuration
Figure 1
Table 4
Position
Description
Input / Output values
1
In / +Voltage A
Uin = (18
–
36): 24 VDC Nominal
Iin = 210 mA Rated at 24 VDC
2
In / Common
3
In / +Voltage B
4
In / Common
5
Earth connection
6
In & out / Relay contact (C - Common)
Uin = 30 VDC max
Iin = 2000 mA max, Pin = 60 W max
7
In & out / Relay contact (NC - Normally Closed)
8
In / Out / - line RS-485
–
IO Interface
Umax = ± 5Vpk
Imax = ± 60 mA
Data rate:
9
In / Out / + line RS-485
–
IO Interface
10
Screen/Shield RS-485
–
IO Interface
