8
The appliance does
not switch on.
1. Power Cord not firmly plugged
into socket
2. No power in the main supply
Filters are blocked
Hose is choked or some blockage
on brush
1. Plug in the unit firmly.
2. Check the fuse or cutout
switch. Replace fuse or reset
the switch.
3. Call authorized service center.
1. Switch-off the cleaner and
disconnect the cleaner from
main power supply.
2. Remove the filter and clean
them.
3. Clean the remaining dust
inside the dust container.
1. Switch-off the cleaner and
disconnect the cleaner from
main power supply.
2. Remove hose and/or brush
and remove any blockage.
The appliance
has weak suction
power
The hose or
brush does not
pick any dust
Troubleshooting
Model Name
KENT Wet & Dry Vacuum Cleaner
Model Number
KSL-612
Net Weight
6.2 kg
Input Power Supply
Single Phase 220 V AC, 50 Hz.
Max. Vacuum Pressure
>
22 kpa
Airflow
>
1.6 m³/min
Noise (dB)
<
86 dB (A)
Power Cord Length
10 m
Maximum Power
1400 W
Technical Specifications
7
Problem
Possible Cause
Possible Solutions
