background image

2

•  The use of an extension cord with this  

 

appliance is not recommended. 

•  Do not remove the plug from the power    

socket until the appliance has been  

 

switched off. 

•  Always hold the plug when removing it    

from the wall, do not pull the cord.

•  Always unplug the appliance when it is not  

in use. 

•  Do not allow the cord to come in to 

contact with the appliance surface during 

operation. 

•  Do not run the cord under carpeting, mats  

or rugs etc. Arrange the cord away from  

traffic areas so that it will not be tripped 

over. 

•  Do not twist, kink or wrap the cord around  

the appliance as this may cause the  

 

insulation to weaken and split. 

•  Children should be supervised to ensure 

that they do not play with the appliance.

•  This appliance is intended for light 

domestic use and not for heavy duty 

commercial or industrial use.

•  The appliance must not be located 

immediately below or in front of a socket-

outlet. 

•  Never remove the cover of the appliance  

– in case of a fault contact a qualified    

service person. 

•  Use this appliance only as described in this  

manual. 

•  Any other use is not recommended by the   

manufacturer and may cause fire, electric 

shock or injury.

 

 

Heater Specifications

  Model No.: KPE216-343

  Heat Settings: 1200W / 2000W

  Rating: 220-240V~, 50Hz

•  Do not cover grilles, block entry or exits of 

airflow by placing the appliance against    

any surface. Keep all objects at least 1    

metre from the front, side and rear of the   

appliance. 

•  Do not locate in areas of high foot traffic,   

ensure the power cord and heater are in    

view to avoid accidents.

•  Do not operate in areas where gasoline,  

paint or other flammable liquids are used or 

stored. 

•  Before moving the appliance, switch off the  

appliance by unplugging it from the wall    

and allowing it to cool.  

•  Do not insert or allow foreign objects or 

metal utensils into any ventilation or exhaust 

openings as this may cause an electric 

shock, fire or damage to the appliance. 

•  Do not use this appliance in the immediate 

surroundings of a bath, a shower or a 

swimming pool.

•  Do not immerse in liquid or use the  

appliance near water as this could create   

an electrical shock hazard. 

•  If the appliance accidentally comes into  

contact with water switch off the power  

supply and do not touch the appliance.

•  Do not operate any appliance with a  

damaged cord or plug or after the  

appliance malfunctions or has been  

dropped or damaged in any manner – 

in order to avoid a hazard. Return to a 

qualified electrical person for service or 

repair. 

•  Do not operate the appliance with wet hands.
•  Do not connect the appliance to the mains  

voltage until completely assembled and    

adjusted. 

•  This appliance is not intended for outdoor use. 
•  Always operate upright, on a flat surface only.
•  CAUTION: This product is NOT suitable to  

be used on long pile carpets or rugs. 

•  Unroll the cord before operating. Operating  

with a coiled cord may cause overheating  

and fire risk.

Summary of Contents for KPE216-343









Reviews: