background image

1

WARNING: DO NOT COVER in 

order to avoid overheating.

•   Do not cover or restrict airflow to the 

inlet or outlet grilles in any manner as the 

appliance may overheat and become a 

fire risk. 

•   This appliance heats up when in use. To  

avoid burns, do not touch the front of the  

appliance or any of the grilles or vents. 

•   Do not use the appliance to dry clothes.
•   This  appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible for 

their safety. 

•   CAUTION: In order to avoid a hazard 

due to inadvertent resetting of the 

thermal cutout, this appliance must not be 

supplied through an external switching 

device, such as a timer, or connected to 

a circuit that is regularly switched on and 

off by the utility.

To reduce the risk of fire, electrical shock or 

injury to persons or property:
•  To avoid overheating, keep airflow grilles  

clear of dust and hair build up - especially  

if you have indoor pets. 

•  Use only the voltage specified on the rating  

label of the appliance. 

Congratulations on your purchase of a Kent 

Portable Electric Appliance. Please read the 

following instructions carefully before use and 

retain for future reference.

BEFORE FIRST USE

•  Read and follow all the instructions below   

even if you feel you are familiar with the    

appliance.

•  Remove the packing and make sure that  

the appliance is in tact. If in doubt do not   

use the appliance and contact the place of  

purchase. 

•  Do not leave packaging materials such as  

bags and staples within reach of children. 

•  Dispose of packaging carefully and with    

consideration for the environment.

•  It is ideal to retain the appliance carton for 

seasonal storage.

For your convenience record the date you 

received the appliance on the warranty page 

of these instructions, and attach your proof of 

purchase. Retain this information in the event 

that a warranty service is required.

NOTE:

 The rating of this appliance (as 

marked on the rating label) is based on 

specific loading tests. Normal use or the use 

of other recommended attachments may draw 

significantly less power.  

 

IMPORTANT SAFETY INFORMATION

When using any electrically powered 

appliance, these basic safety precautions 

should always be followed.

4593-12/16

OWNERS INSTRUCTION MANUAL

MICA PANEL HEATER

Model No. KPE216-343

Summary of Contents for KPE216-343









Reviews: