3
ASSEMBLY INSTRUCTIONS
KPE216-161
1. Position the heater carefully upside down.
2. Take the wheel base with the holes shown
below, and place it over the screw end
protruding from the base of the controls end
of the heater. Fix tight using the wing nut
supplied.
3. Take the U-bolt and insert it in between the
end and next fin, at the other end of the
heater.
Place the wheel base assembly over the
screw ends of the U-bolt and fix tight using
the wing nuts supplied.
4. Turn the heater the right way up.
KPE216-163
1. Position the heater carefully upside down.
2. Take the U-bolt and insert it in between the
end and next fin.
Place the wheel base assembly over the
screw ends of the U-bolt and fix tight using
the wing nuts supplied.
3. Repeat the same process at the other end
of the heater.
4. Turn the heater the right way up.
Summary of Contents for KPE216-161
Page 7: ...7 ...
