background image

2

• Do not allow the cord to come in to

contact with the appliance surface during

operation.

• Do not run the cord under carpeting, mats

or rugs etc. Arrange the cord away from

traffic areas so that it will not be tripped over.

• Do not twist, kink or wrap the cord around

the appliance as this may cause the

insulation to weaken and split.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• This appliance is intended for light

domestic use and not for heavy duty

commercial or industrial use.

• The appliance must not be located

immediately below or in front of a socket-

outlet.

• CAUTION: In order to avoid a hazard

due to inadvertent resetting of the thermal

cutout, this appliance must not be supplied

through an external switching device, such

as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

• Never remove the cover of the appliance

– in case of a fault contact a qualified

service person.

• Use this appliance only as described in this

manual.

• Any other use is not recommended by the

manufacturer and may cause fire, electric

shock or injury.

Heater Specifications

Model No.: KPE216-146

Heat Settings: 1000W / 1500W

Rating: 220-240V~, 50Hz
Model No.: KPE216-147

Heat Settings: 1200W / 2000W

Rating: 220-240V~, 50Hz

• Before moving the appliance, switch off the

 

appliance by unplugging it from the wall

 

and 

allowing it to cool.

• Do not use the appliance to dry clothes.
• Do not insert or allow foreign objects or

 

metal 

utensils into any ventilation or exhaust

 

openings as this may cause an electric

 

shock, 

fire or damage to the appliance.

• Do not use this appliance in the immediate

 

surroundings of a bath, a shower or a

 

swimming pool.

• Do not immerse in liquid or use the

 

appliance 

near water as this could create

 

an electrical 

shock hazard.

• If the appliance accidentally comes into

 

contact with water switch off the power

 

supply 

and do not touch the appliance.

• Do not operate any appliance with a

 

damaged cord or plug or after the

 

appliance 

malfunctions or has been

 

dropped or 

damaged in any manner –

in order to avoid a hazard. Return to a

 

qualified electrical person for service or

 

repair.

• Do not operate the appliance with wet hands.
• Do not connect the appliance to the mains

 

voltage until completely assembled and

 

adjusted.

• This appliance is not intended for outdoor use.
• Always operate upright, on a flat, firm

 

surface 

only.

• CAUTION: This product is NOT suitable to

 

be 

used on long pile carpets or rugs.

• Unroll the cord before operating. Operating

 

with a coiled cord may cause overheating

 

and 

fire risk.

The use of an extension cord or multi plug 

with this appliance is not recommended.

• Do not remove the plug from the power

socket until the appliance has been 

switched off. 

• Always hold the plug when removing it

from the wall, do not pull the cord.

• Always unplug the appliance when it is not

in use.

Summary of Contents for KPE216-146









Reviews: