the display will stop flashing and return to
displaying the current room temperature.
Timer Function
• This function will work in any mode. The
timer function allows you to set the length
of operation from 1 hour to 18 hours.
• To set the timer, press the TIMER button.
The clock symbol will illuminate.
• Now press the up (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) or down (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
)
arrow buttons to set the number of hours
for which the heater is to run before
automatically switching off.
• Once the timer has been set, the timer will
count down the hours, hour by hour, until
the heater will turn itself off.
• To deactivate the timer, press the down (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
)
arrow button until the display shows “0”.
The clock symbol will disappear.
Remote Control
• The remote control duplicates all the controls
that are on the control panel. Please refer to
the above instructions for operation.
SAFETY FEATURES
Over-Heat Protection
• This heater is protected with an over-heat
protection cut-out facility that switches it off
automatically if it over-heats.
• Overheating can be caused by obstruction
to the air intakes on the back of the heater
or the grill on the front.
• If this occurs please disconnect the heater
from the power socket and allow it to cool
for 30 minutes. Remove any obstruction
and turn the heater back on.
• The heater should operate normally.
Should the problem persist contact your
nearest service centre.
Safety Cut-Out Switch
• The heater is fitted with a safety cut-out
switch to switch the heater off if it is
knocked over.
• If the heater is knocked over and the
cut-out switch activates turn the heater off
at the power outlet and take EXTREME
care when standing the heater upright as it
will still be hot.
• Inspect the heater for damage especially to
the heating elements and supply cord.
• If any damage is visible do not operate the
heater.
OPERATING INSTRUCTIONS
NOTE
: When switched on for the first time
a slight odour may be emitted for a few
minutes. This is harmless and occurs with most
appliances as slight traces of dust or lubricants
may have collected during manufacture.
• Place the heater on a level surface in a
stable upright position.
• Ensure the power switch on the bottom
left side of the heater is in the “O” (OFF)
position.
• Unwind the power cord and plug your
heater into a power socket (observing the
instructions regarding positioning). Ensure
the voltage on the specification plate is the
same as in your home and the power cord
is lying safely on the ground.
• Turn the power ON using the switch at side
of the heater ( I ). The digital display on the
end of the heater will light briefly.
• Press the (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) button to switch the heater ON.
• The digital display will display the room
temperature.
• The up (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) and down (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) arrow buttons
can be used to select full power (2400W)
or half power (1200W). This is indicated
by the segments to the right of the flame
symbol.
• (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) = half power and (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) = full power.
• To switch the heater off fully, press the (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
)
button to switch the heater OFF, and then
press the power switch to (O).
Thermostat Function
• Set the desired room temperature by
pressing the TEMP button, then press the up
(
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) or down (
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
) arrow button to change
the target temperature.
• The thermometer symbol will illuminate,
and the digital display will flash, showing
the target temperature. After 5 seconds
3
Digital
Display
Temperature
Symbol
Setting
Adjustment
(up)
Setting
Adjustment
(down)
Half Power
(1200W)
Full Power
(2400W)
Power
indicator
Timer
Symbol
Temperature
Select button
Timer Select
button
Power button
