FORM NO.56041563 / Rainmaker
™
H -
7
KNOW YOUR MACHINE DESCRIPTIONS
Operator Handle (1)
- Operator holds this to move the machine from one location to another.
Lift Handle (2)
- Operator grasps this handle when lifting the machine.
Solution Tank Lid (3)
- Fill Solution Tank here with warm water and chemicals.
Recovery Tank Lid (4) -
The Recovery Tank can be flushed out by running clean water into this
opening with the Recovery Tank Drain Hose open. The vacuum float Shut-OFF can also be
accessed through this opening for maintenance.
Switch Plate (5)
- The switches that operate the motors and the heater are located here, as well
as indicator lights for the heater.
Vacuum Hose Connector (6)
- This is where the vacuum hose attaches to the machine.
Solution Hose Connector (7)
- This is where the solution hose attaches to the machine.
Latches (8)
- These latches can be opened if the base compartment needs to be accessed. The
latches are normally closed to keep the machine sections held together tightly.
Drain Gate (9)
- This gate is opened to allow the dirty recovered water to empty.
1
2
3
4
5
6
8
7
9
KNOW YOUR MACHINE
https://harrissupplyind.com - To Order Parts Call 608-268-8080
