OPERATING YOUR OXY FRYER
BEFORE FIRST USE
1. Remove all packaging materials and stickers or labels.
2. Clean the basket and pan with hot water,
some washing liquid and a
non-abrasive sponge. These parts are safe to be cleaned in dishwasher.
3. Wipe inside and outside of the appliance whit a cloth. And there is no need to fill the
pan
oil.
PREPARING FOR USE
1. Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
2. Put the basket in the pan. (fig.2).
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance, the airflow will be disrupted.
HOT FRYING
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the fryer (fig.3)
3. Place the ingredients in the basket.
4. Slide the pan back into the FRYER (fig.4)
Never use the pan without the basket in it.
Caution : Do not touch the pan during and in short-time after use, as it gets
very hot. Only hold the pan by the handle.
5. Turn the temperature control knob to the proper temperature. See section 'Settings'
in this chapter to determine the right temperature (fig.5).
6. Determine the required preparation time for the ingredient
(see section 'Settings' in this chapter).
7. To switch on the appliance, turn the timer knob to the required preparation time (fig.6).
Add 3 minutes to preparation time if the appliance is cold
Note: If you want, you can also preheat the appliance without any ingredients inside.
In that case, turn the timer knob for more than 3 minutes and wait until the heating-up
light turn off (after about 3 minutes). Then fill the basket and turn the timer knob to the
required preparation time.
a) The power-on light and the heating-up light go on. (fig.9)
b) The timer starts counting down the set preparation time.
c) During the hot frying process, the heating-up light turn on and turn off from time
to time. This indicates that the heating element is switched on and off to maintain the
set temperature.
d) Excess oil from the ingredients is collected on the bottom of the pan.
with
with
It is recommended to use a high-power socket rather than a defective one.
Do not share a socket with high-power appliances such as air conditioners
and electric stoves to avoid over-current from causing fire.
4
