Freestyle Mouse User Manual
3
2
Wireless Installation
To establish a wireless connection, press the con-
nect button on the receiver
(1)
. Then, press the
connect button on the bottom of the mouse
(2)
.
Repeat this procedure when replacing the batteries.
IMPORTANT: This wireless device is similar to an FM radio, by
adjusting the antenna you can get better reception. You may
also want to experiment with different locations and positions
of the receiver.
Battery Installation
Remove top case (battery cover) and insert batteries. To remove
top case, push down
(1)
and slide the case back
(2)
.
To save battery power, turn off the mouse when not in use by
pressing the scroll wheel button and the mouse connect button
at the same time. Repeat to turn mouse back on.
Note:
The mouse goes into standby mode after several minutes
of inactivity. This extends the battery life of the mouse. To
wake the mouse up again, simply click any button.
(1)
(2)
(1)
Connect Button
(2)
(1)
72214(906051601)read.qxd 11/10/2003 4:59 PM Page 4
