5
LED Behavior and Explanation
LED Behavior
Explanation
• If the KeyStand is off, asleep, or the battery is dead, the LEDs will remain
off.
• Initially at power-up, the
Power
and
Bluetooth
LEDs will turn on and stay
lit for 5 seconds.
• After 5 seconds the
Bluetooth
LED will turn off, followed by the
Power
LED 0.5s later.
• When the
Bluetooth Connection Button
is pressed, the
Power
LED will
stay solidly lit, while the Bluetooth LED will begin to blink for 10 minutes
or until connected to an iPad.
• Blink pattern: ON 1s, OFF 0.5s
• Once the KeyStand is connected with your iPad, the
Power
LED will
remain lit and all others will go off.
• Also, if the KeyStand is awoken from sleep mode, the
Power
LED will turn
on immediately.
• While the KeyStand is connected to your iPad, the state of the Caps Lock
toggle is shown by the
Caps Lock
LED.
• When the KeyStand is plugged into a power source, the
Charge
LED will
turn flash red and turn off only when charge is completed.
Charge the Battery
Charge your KeyStand Expert before initial use or when the
Charging Indicator
glows red.
1
Insert the small end of the
Charging Cable
into the
micro USB Charging Connector
on
the Keyboard.
2
Insert the other end of the
Charging Cable
into your iPad charger.
3
Plug your iPad charger into a working outlet. The
Charging Indicator Light
glows red.
4
When the Keyboard is fully charged, the
Charging Indicator Light
turns off.
