Contents
A
Bluetooth USB Adapter 2.0
B
CD-ROM with Bluetooth software and manual
C
Bluetooth USB 2.0 Adapter Instruction Guide
Congratulations
The Kensington Bluetooth USB Adaptor 2.0 gives you enhanced speed, security and reliability for
your favorite Bluetooth devices. Please read this Instruction Guide to learn valuable information
about the proper installation and use of your device. Register your new Bluetooth USB Adapter 2.0
online at
www.kensington.com
.
System Requirements
Hardware Requirements
• PC with a Pentium® processor or equivalent
• Available USB port (USB 2.0 or 1.1)
• CD-ROM drive
Operating System Requirements
• Windows® XP with Service Pack 1 or higher
• Mac® OSX v 10.2.8 or later. Works with most Bluetooth® v1.1, v1.2, v2.0 enabled devices,
excluding Bluetooth headsets. Mac software not included, visit
www.apple.com
for
Bluetooth software driver.
Installation Instructions
Mac OS X users (10.2.8 or later):
Simply plug in the Bluetooth USB adapter to start Bluetooth.
For setup and configuration information, see
Installing on Mac OS X (10.2.8 and Later)
.
Windows XP users:
Uninstall any existing Bluetooth software before you begin this installation.
Install the Bluetooth Software included on the CD-ROM first, and then plug in the USB adapter.
For more detailed information or instructions consult the manual on the CD-ROM.
IMPORTANT: The user must have administrator privileges to install the the software driver
and applications. If non administrative user is logged on then the software will not be
installed correctly.
Instruction Guide
Guide d’instructions
Bedienungsanleitung
Handleiding
Istruzioni
Manual de instrucciones
C
B
A
Kensington Computer Products Group
A Division of ACCO Brands
333 Twin Dolphin Drive, Redwood Shores, CA 94065
Designed in California, U.S.A. by Kensington. Made in China
www.kensington.com
901-1655-01
Bluetooth
®
USB Adapter 2.0
Bluetooth Technology v2.0
Instruction Guide
Windows XP Installation
1. Put the installation CD in your CD drive.
2. Click
Click! to Install
to begin. (If the CD does not autoplay, select
Start
>
Run...
and type:
D:autorun.exe
, where ‘D’ is the letter of your CD drive.)
3. Select
I accept the terms in the license agreement
, and click
Next
.
4. Click
Next
to continue.
5. Click
Install
to begin installing the software. A status window shows the progress of the installation.
6. Click
OK
to continue.
NOTE: If this warning appears, plug the Bluetooth USB adapter into an available USB port.
7. After the Bluetooth USB adapter is connected, click
Next
to install the driver software.
8. Click
Finish
and then click
Quit
on the main CD contents screen.
Set up the Bluetooth Software
1. Double-click
My Bluetooth Places
on the desktop to begin the setup.
2. Click
Next
to continue.
3. Enter a unique name for this computer. Select either
Laptop Computer
or
Desktop Computer
from the dropdown menu, and then click
Next
.
33348US_33x22.qxd 10/24/06 4:55 PM Page 1
