51057CONSOL ASSEMBLY INSTRUCTIONS
How much water do I need to keep in the water feature?
How often will I need to fill my water feature?
I cannot find my installation instructions. Where can I find another
My pump is making a loud noise. How do I fix that?
Where possible in our water features, we have included fill lines to help
you visualize the water level required for proper function. If your water
feature does not include fill lines, please check the instruction manual for
water capacity. The most important aspect to keeping your water feature
functioning is to insure the pump is submerged in water at all times to
prevent damage to the pump.
Over time, the water level in your water feature will recede. This is due to
evaporation, and the speed at which your water feature will need to be
filled depends greatly on your environment- the humidity, if your water
feature is in the sun, how often you run the water feature, etc. We
recommend checking the water level before running the water feature to
insure the pump is submerged in water.
copy?
Installation and assembly instructions can be found online at
www.kenroyhome.com
1. Be sure the pump is fully submerged in water. If it is not, and pulling
in air, it will make unwanted noise.
2. Check to make sure the pump is not touching the water feature
anywhere other than the bottom. If it is up against the side wall or
another part, the vibration from the pump can cause unwanted noise.
If moving the pump away from other parts does not work, try placing a
sponge or other soft material between these areas to pad the pump.
How do I change my pump speed?
You cannot adjust the pump speed.
FREQUENTLY ASKED QUESTIONS
CONTINUED
