Kennedy CellSet MC/BT2 Installation And User Manual Download Page 3

Page: 3 / 3

cell phone (i.e. transmit level).

You may need to experiment with these switches to achieve optimum results for your particular intercom
settings.

Replace

CellSet’s

top cover screws and mount the box to the bike using tie wraps.

NOTES:

CellSet

is water

resistant

, not water

proof

:, so mount it in a sheltered location.

CellSet

is internally fused with a solid state, auto-reseting, 1/10 Amp fuse. To reset the fuse, turn the

bike’s power “off”, wait a few seconds then turn it back “on”.

Summary of Contents for CellSet MC/BT2

Page 1: ...purchased a combination audio power cell phone harness CellSet charges the adapter for a period of three 3 hours after you turn your bike OFF After 3 hours CellSet stops charging the adapter and goes...

Page 2: ...ock switch S1 position 1 to the ON position If the tag reads SW1 OUT rock switch S1 position 1 to the OFF position For reference the side figure shows the switch in the OFF position Turn on your inter...

Page 3: ...settings Replace CellSet s top cover screws and mount the box to the bike using tie wraps NOTES CellSet is water resistant not water proof so mount it in a sheltered location CellSet is internally fus...