4
5
PREPARING TO USE YOUR COFFEEMAKER
PARTS AND FEATURES
OPERATING YOUR COFFEEMAKER
hopper lid
housing
bean chute cover
lock/open
button for
bean chute cover
water
reservoir
window
release button
for filter basket
door
control panel
with backlit
buttons
water
reservoir
base
LCD display
window
bean grid
selector knob
12-cup carafe
filter basket &
removable
gold-tone filter
coffee beans hopper
charcoal
water filter
water filter
carriage
warming plate
scoop & brush
Fig. 1
• Before the first use of the coffeemaker wash the brew basket, the permanent gold-tone filter, the
carafe and carafe lid in either the top rack of your dishwasher, or by hand in warm, sudsy water.
• The exterior of the coffeemaker, the control panel area and the warming plate should only be
cleaned with a soft damp cloth.
CONTROL PANEL
ON/OFF
If you want to start or stop the current operation, you need to press the ON/OFF button. The
button LED is either on or off to indicate operating status. When the machine is in brewing mode,
the Grind Off, Program, Hour, Min, 2-12 Cup and Strength buttons cannot be used. However,
other buttons that do not affect the current grind and brew procedure can be pressed.
PROGRAM
Briefly press this button to start or stop the delay brew after setting the current time and delay
brew time. The PROG button LED will turn on or off accordingly. After setting the current time,
long press the PROG button, then enter the delay brew setting state. The initial setting is "12:00
PM", 10 cups, medium strength, grind and brew. Now press the “Hour” button, then “Min”
(minutes) to set the delay brew time. If no operation is performed for 10 seconds, the brew delay
setting is set. Briefly press the PROG button to start the delayed brew.
HOUR
Button for setting the time. Press the HOUR button to set the hour. The setting range can be 0-12
AM-PM. The clock stops running during this time, the second digit displays zero, and if you set the
time for brew delay, then brew delay times will display.
After all parts are washed for the first time, pour cold water up to the 12 cup level mark in the
water reservoir. Brew it through the coffeemaker as instructed in BREWING COFFEE, but do not
add coffee grounds to the filter. When done, turn off the coffeemaker and discard the water from
the carafe. This will remove any possible residue left over from the manufacturing process.
NOTE - NEVER clean the warming plate unless it is completely cool.
NOTE - DO NOT use abrasive cleansers or scouring pads when cleaning the unit.
NEVER immerse the coffeemaker in water or any liquid.
