Kenmore Grab-N-Go 795.7033 Series, Use & Care Manual, Page: 17 / 46

Place cover into position and insert and tighten
the screws.
To replace the base cover:
Turn the leveling leg to the left to raise that side of
the refrigerator or to the right to lower it. It may take
several turns of the leveling leg to adjust the tilt of
the refrigerator.
2.
1.
NOTE:
Having someone push backward against the
top of the refrigerator takes some weight off of the
leveling legs. This makes it easier to adjust the legs.
3.
4.
5.
Open both doors again and check to make sure that
Re-adjust if necessary.
Replace the base cover.
they close easily. If the doors do not close easily, tilt
the refrigerator slightly more to the rear by turning
both leveling legs to the left. It may take several more
turns, and you should turn both leveling legs the same
amount.
NOTE:
Your refrigerator is uniquely designed with
two fresh food doors. Either door can be opened or
closed independently of the other. You may have to
exert slight pressure on the doors to get them to close
completely.