18
USING YOUR REFRIGERATOR
CAUTION
To reduce the risk of scratching the door or breaking the
door mullion, please make sure that the refrigerator door
mullion is always folded in.
Caution When Closing the Door
Accent Light / Light Sensor
This light has three settings: On, Off and Auto. If
the light is set to the Auto mode, the Accent Light
will automatically turn on and off according to the
brightness of room, as detected by the light sensor.
Energy Saver
The
Energy Saver
function disables the mullion heater
located on the refrigerator door in order to conserve
electricity. Press and hold the
Energy Saver
button for
3 seconds to activate or deactivate this function.
NOTE
: Discontinue using the
Energy Saver
function
if excessive moisture begins to collect on the door
mullion.
Articulating Mullion
This feature is a metal strip attached to the left door
that articulates (rotates) 90 degrees as the door is
closed, forming a mullion (base) for the left and right
door gaskets to seal against.
Air Filter
The
Air Filter
helps remove odors
from the refrigerator. The
Air Filter
has two settings, Auto and MAX. In
Auto mode, the
Air Filter
will cycle
on and off in increments of ten
minutes on and one hundred and
ten minutes off. If set to the MAX
mode, the
Air Filter
will stay on
continuously for four hours, cycling
on and off in increments of ten
minutes on and five minutes off. After four hours, the
Air Filter
will switch to Auto mode.
• Auto mode is the default mode.
• Press the
Air Filter
button once for MAX mode
Air Filter Reset
When the
CHANGE AIR FILTER
icon turns on, the air
filter needs to be replaced. After replacing the air
filter, press and hold the
Air Filter
button for three
seconds to turn the icon light off. It is recommended
to change the air filter approximately every 6 months.
Ultra Ice
• When you press and hold the
Ice Select
button, the
Ultra Ice graphic will illuminate in the display and will
continue for 24 hours. The function will automatically
shut off after 24 hours.
• You can stop this function manually by touching the
button one more time.
• This function increases both ice making and freezing
capabilities.
Water Filter Reset
When the water filter indicator turns on, you have
to change the water filter. After
changing the water filter, press
and hold the
Water Filter Reset
button for three seconds to
turn the indicator light off. You
need to change the water filter
approximately every six months.
