15
Questions? Call the Kenmore Water Line 1-800-426-9345.
Figure 20
Figure 21
Programming the Softener
SET SALT TYPE
If you completed the previous step, either “NaCl” (for
Sodium Chloride) or “KCl” (for Potassium Chloride)
should show in the display. Otherwise, press the
SELECT button several times until one of them does.
1
. Press the
r
UP or
s
DOWN buttons to set the type
of salt you will be using in your water softener. The
default is NaCl (standard Sodium Chloride water sof-
tener salt). If you will be using KCl (Potassium
Chloride) instead, be sure to set salt type to KCl. This
setting adjusts the regeneration cycle times to com-
pensate for the different rate at which KCl dissolves.
See also Page 16 for more information on salt types.
2
. When the correct salt type is displayed, press the
SELECT button, and the display will return to the nor-
mal run (time of day) screen.