7
Cycle Settings
Cycle Options
Drying Temperature
To change the preset temperature, press the
TEMP
button
to scroll to the desired setting.
To protect your fabrics, not all temperatures are available
with every cycle.
The temperature selected for the cycle will be remembered
and recalled each time that cycle is selected in the future. To
return to factory settings, press the
Pause/Cancel
and
Select
buttons at the same time and hold until the signal sounds.
High
High is recommended for sturdy fabrics.
Med-High
Med-High is recommended for regular fabrics.
Medium
Medium is recommended for wrinkle free, permanent press
and lightweight fabrics.
Low
Low is recommended for delicate fabrics.
No Heat
This setting (no heat) should only be used with a
Timed
Dry
cycle to dry items containing feathers, down, foam
rubber, plastics or rubber-like materials; to refresh clothing,
stuffed animal, pillows or blankets; and to dust draperies.
Dryness Level (Auto Dry)
To change the preset level, press the
Dryness
button to scroll
to the degree of dryness desired.
To protect your fabrics, not all
Dryness
levels are available
with every cycle. If a
Dryness
level is not appropriate for the
cycle, it cannot be selected.
The
Dryness
level selected for the cycle will be remembered
and recalled each time that cycle is selected in the future. To
To change the temperature once the cycle has begun,
press the
Pause/Cancel
button
once
, make the new selec-
tion and press
Start
again.
To change the
Dryness
level once the cycle has
begun, press the
Pause/Cancel
button
once
, make the new
selection and press
Start
again.
Follow the fabric care label
instructions on items to be
washed.
For best results
Appropriate
Temperature
,
Dryness
level and
Options
will
automatically be displayed for each cycle. The settings can be
changed before the cycle is started.
If changes are attempted after the cycle starts, the lights will
blink, the signal will beep and “
Err
” will be displayed.
return to factory settings, press the
Pause/Cancel
and
Select
buttons at the same time and hold until the signal sounds.
Select the
Normal
dryness level for most
Auto Dry
cycles.
Occasionally a load may seem too damp or over-dried at the
end of the cycle. To increase drying time for similar loads in
the future, select
More Dry
. For loads requiring less drying
time, select
Less Dry
.
Select
Damp
for items you wish to partially dry before hang-
ing or ironing.
To select or delete the
Soft Heat
,
Shrink Guard
,
Wrinkle
Rid
, or
Cycle Signal
, press
OPTIONS
until the blinking light
indicates the desired option. Then, while it is blinking, press
Select
. The indicator will light when the option has been se-
lected. It will no longer be lighted when the option has been
removed.
Not all options are available on every model or are compatible
with every cycle. The indicator will not light if the option is
not available with that cycle.
To change the options once the cycle has begun,
press the
Pause/Cancel
button
once
, make the new selec-
tion and press
Start
again.
The options selected for the cycle will be remembered and
recalled each time that cycle is selected in the future. To
return to factory settings, press the
Pause/Cancel
and
Select
buttons at the same time and hold until the signal sounds.
Soft Heat
Select the
Soft Heat
option to protect a load from
excessive heat which can lead to shrinking and over-drying.
The drying temperature will be gradually reduced as the
load dries.
Shrink Guard
Select
Shrink Guard
to lower the initial drying temperature.
Add it to the
Soft Heat
option to further protect fabrics
from overdrying.
Wrinkle Rid
Select
Wrinkle Rid
if the dried load might not be removed
promptly at the end of the cycle. The dry load will continue
tumbling without heat for 30 minutes to help reduce
wrinkling. When the
Cycle Signal
is selected, a beep will
be heard periodically. The load may be removed any time
during
Wrinkle Rid
.
Cycle Signal
A signal will sound at the end of the cycle and periodically
during
Wrinkle Rid
if this option is selected.
