P/N 134152900 (0207)
• DAMP DRY - This setting is best for items you
wish to partially dry before hanging or ironing.
Select the temperature setting most suitable for
the load.
• WRINKLE-RID -
If the dried load cannot be
removed promptly at the end of the cycle, the
cycle selector will
automatically
advance to the
WRINKLE RID setting if the
WRINKLE RID
option is
turned
ON
. Unheated tumbling continues for up to
24 minutes to help reduce wrinkling. The timer
will
not
automatically advance into the WRINKLE RID
setting if the
WRINKLE RID
option is turned
OFF
.
Note: WRINKLE RID
can be used independently for up
to 15 minutes of unheated tumbling to help remove
wrinkles from items that are already dry. Turn
selector knob to WRINKLE RID and start dryer. It is not
necessary to set Temperatures or WRINKLE RID option
controls.
Air Fluff Cycle
This cycle provides up to 20 minutes of tumbling
without heat. Use AIR FLUFF to dry items
containing feathers or down, foam rubber, plastics,
or similarly textured, rubber-like materials, to
freshen clothing, pillows or blankets, or to dust
draperies.
Automatic Dry Cycle
• TOWELS - This setting is best for towel loads.
Select the REGULAR--HIGH HEAT temperature
setting.
• REGULAR - This setting is best for cotton items.
Select the REGULAR--HIGH HEAT temperature
setting.
• DELICATES/PERM PRESS - This setting is best
for delicate, knit, or perm press items. Select the
PERM PRESS--MEDIUM HEAT temperature
setting for permanent press items, the KNITS---
MEDIUM-LOW temperature setting for most knit
items, or the DELICATES--LOW HEAT
temperature setting for delicate items.
• Occasionally a load may seem too damp or
overdried at the end of the cycle. To increase
drying time for similar loads in the future, set the
cycle selector on the indicator line to the left of
the TOWELS, REGULAR, or DELICATES/PERM
PRESS setting. For loads requiring less drying
time, set the cycle selector on the indicator line to
the right.
Cycle Selection
(continued)
Timed Dry Cycle
This cycle provides up to 80 minutes of drying time
at the temperature selection of your choice.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose the
Automatic Dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room temperature
is at least 45°F (7°C).
