background image

9.

Start the washer by closing the door and
pulling out the cycle selector knob.

 The

washer will 

not

 operate with the door open.

As a safety measure, the door will
automatically lock during the entire wash
cycle.  When the door is closed, the

 Door Lock

Indicator

 lights up when the washer starts,

and turns off at the end of the cycle.

To stop the washer, push in the cycle
selector knob.

To change a cycle, push in the cycle
selector knob and turn it clockwise to the
desired setting.

Pull out the knob to restart the washer.

10.

Remove items when cycle ends. 

 A signal

will sound at the end of the cycle if desired.

Before Operating Your Washer

Read your washer Use and Care Guide.

 It has

important safety and warranty information. It also
has many suggestions for best washing results.

 To reduce the risk of fire, electric shock,

or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Use and Care Guide
before operating this appliance.

Operating Steps

Read and follow 

Washing Procedures 

in your Use

and Care Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.

1.

Sort laundry into loads that can be washed
together.

2.

Prepare items for washing

.

Printed in U. S. A.

Note:

  From time to time you may see water in

the bleach and fabric softener compartments.
This is a result of the siphoning action and is
part of the normal operation of the washer.

P/N 137065000 (0804)

    C48102

OPERATING INSTRUCTIONS

3.

Pretreat stains and heavy soil.

4.

Add laundry load to the wash drum.

5.

Open the dispenser drawer and add the
measured amount of detergent to the
detergent compartment. 

If desired, add liquid

bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.

Drawer should be completely closed for
laundry  additives to dispense.

6.

Set the Wash/Rinse Temperature switch
according to fabric type and soil level of
each load.

7.

If desired, select Extra Rinse in the Regular
and Perm Press cycles.

8.

Push in the cycle selector knob and turn it
clockwise to the desired wash cycle and
setting.

Summary of Contents for C48102

Page 1: ...nce Operating Steps Read and follow Washing Procedures in your Use and Care Guide It provides detailed information for preparing the wash load and choosing control settings to ensure best washing results 1 Sort laundry into loads that can be washed together 2 Prepare items for washing Printed in U S A Note From time to time you may see water in the bleach and fabric softener compartments This is a...

Page 2: ... and a brief tumble complete the cycle Controls Always follow instructions on fabric care labels Note There is no need to select a water level because the washer automatically adjusts the water level to the type and size of wash load WASH RINSETEMPERATURE Thisdetermineswater temperatures for washing and rinsing For example the Warm Cold setting provides a warm water wash and a cold water final rin...

Page 3: ... tiroir doit être complètement fermé pour que les additifs de blanchisserie distribuent 6 Poussersurlesélecteurdecycleetletournerdans lesensdesaiguillesd unemontrejusqu aucycle désiré 7 Si on le désire choisir OUI Rinçage supplémentaire dans les cycles Lavages réguliers et Lavages délicats à la main Pour économiser l eau choisir NON à Rinçage supplémentaire 8 Pousser sur le sélecteur de cycle et l...

Page 4: ...e Rinçage Trés sale blanc Hot Cold grand teint coton Chaud Froid apprêt permanent Modérément sale blanc Warm Cold apprêt permanent Tiède Froid coton grand tient Légèrement sale tricots non grand tient délicats Cold Cold lavables à la main Froid Froid Laines lavables Warm Warm Tiède Tiède Choix des cycles Pour obtenir de meilleurs résultats respecter les directives des étiquettes d entretien des ar...

Reviews: