![background image](http://html.mh-extra.com/html/kenmore/970-3394-series/970-3394-series_use-and-care-manual_1954458034.webp)
34
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1.
Press
.
2.
Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed,the oven door
can then be opened (Fig. 7).
Fig.7
When the Self-Clean cycle is done:
1.
The time of day,"DOOR LOCKED" and "CLEAN" icon will
remain in the display.
2.
Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened.
IMPORTANT NOTES when using the Self-Cleaning feature:
1. A Self-Cleaning cycle cannot be started if the Oven Lockout feature is active.
2. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly
cleaned. Once power is restored, set for another Self-Cleaning cycle to finish.
3. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 17 for instructions to set the control for
the 24 hour time of day display mode.
INSTRUCTIONS
PRESS
DISPLAY
Self- Cleaning
•
Setting Flex Clean
•
Setting Delay Flex Clean