background image

2

ENGLISH

Temperature Control ..........................................................2
 

Temperature Setting ....................................................2

 

Temperature Mode Change ........................................2

 

Quick Freeze ...............................................................2

 

Control Lockout ...........................................................3

Sabbath Mode ...................................................................3
Manual Defrost ..................................................................3
Alarm Functions ................................................................3
 

Temperature Alarm .....................................................3

 

Door Ajar Alarm ..........................................................3

 

Power Failure ..............................................................4

 

System Errors Alarm ...................................................4

 

Alarm Function Table ..................................................4

TABLE OF CONTENTS

TEMpERATURE MODE CHANGE

Temperature display can be changed from ºF to ºC to ºF 

by pressing and holding the “Temp Display” button for five 

seconds. Press and hold the button again to change it 

back to the previous mode.

QUICK FREEZE

Quick Freeze enables the compressor to run continuously 

to help cool large quantities of warm (room temperature) 

foods faster. Always cool down hot foods to room 

temperature before placing them in the freezer. Use this 

feature just prior to adding large quantities of unfrozen 

foods (not to exceed 3 pounds per cubic foot of freezer 

space). For example, do not place more than 45 pounds of 

room temperature food into a 15 cubic foot freezer. 

To activate the Quick Freeze feature, push the Quick 

Freeze button. The control panel will beep once and the 

display will now read “-F-” for one second and the Quick 

Freeze LED illuminates indicating that the Quick Freeze 

cycle has begun. See Figure 4. 

TEMpERATURE CONTROL

TEMpERATURE SETTING

The desired temperature inside the freezer can be set us-
ing the UP and DOWN arrow buttons on the control panel, 
located on the door of the freezer. Press either the UP or 
DOWN arrow buttons to change the temperature setting to 
one which suits your needs. The range of settings is -10°F 
to 10°F ( -24ºC to -12ºC )  (See Figures 1 and 2). 

Figure 1

Figure 2

You may also turn off the freezer by pressing the UP arrow 
button until the display reads “10”. With the display at 
“10’, press the Up Arrow button two more times within two 
seconds. The display will read “0F”.

The freezer can be turned ON by pressing the DOWN 
arrow button, with the display -10, two times within two 
seconds. Continue by setting the control to the desired 
temperature.

The freezer will not cool anything while it is in “0F” position. 
The door light will continue to operate while in ‘0F”. 

WARNING: The freezer still has electrical power 
while in 0F. Disconnect freezer from the outlet before 
cleaning or moving it.

Figure 3

Summary of Contents for 970-247721














Reviews: