PN 134524300B (0501)
Error Code
4 beeps / E4A
6 beeps / E68
Towel
Bulky
Normal
Perm Press
Sport
Quick
Delicate
Touch Up Timed Dry
Estimated drying
time ***
60 minutes 45 minutes 50 minutes
40 minutes
20 minutes 30 minutes 20 minutes 15 minutes
15 to 90
minutes
Temperatures
High
*
Medium-High
*
*
Medium
*
*
*
Low
*
*
*
No Heat
**
**
**
**
**
Dryness Level
More Dry
Normal Dry
*
*
*
*
Less Dry
*
Damp Dry
Options
Soft Heat
*
*
*
Shrink Guard
Wrinkle Rid
*
*
Cycle Signal
*
*
*
*
*
*
*
*
*
* Factory setting
Available settings ** Not recommended
Solutions
Remove lint; wash lint filter to
remove softener sheet residue
Clean out ventilation system.
Reduce load size.
Press buttons lightly and
release. Disengage button.
Push button held too long or wedged in the control panel.
If the dryer stops, the status lights flash, the signal beeps and a code is displayed, an error has occured. Press PAUSE/CANCEL twice. Consult the Error Code Chart below or the
"Avoid Service Checklist" in the Owner's Guide for the possible cause and solution. Make necessary corrections, then select a cycle and press START. If the dryer stops, status lights
flash again, the beeping continues and the code reappears, please contact service for assistance.
DRYER SETTINGS CHART
AVAILABLE CYCLE SETTINGS - These temperatures, dryness levels and options are available with the following cycles:
*** Estimated cycle duration is based on normal dryness
level and factory settings.
Push button does not function
ERROR CODE CHART
Error
Dryer ran too long
Possible Causes
Lint filter blocked. Ventilation system clogged. Dryer overloaded.
20
120