25
Cleaning the Water Inlet Filters
If the washer does not
o
ll properly, an error message will
show on the display. The inlet valve
o
lter screens could
be plugged by hard water scale, sediment in the water
supply, or other debris.
NOTE:
The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that could
enter the valves with the water supply. Operating the
washer with these
o
lters removed could cause a valve
to fail to open, resulting in
p
ooding and/or property
damage.
IMPORTANT:
ONLY use new, high-quality inlet hoses
when installing this laundry product. Aftermarket hoses
are not guaranteed to
o
t or function correctly. Other
hoses may not tighten correctly and could cause leaks.
Subsequent damage to product or property will not be
covered under the terms of the product warranty.
1
Turn OFF both water faucets completely. Unscrew
the hot and cold water lines from the back of the
washer.
MAINTENANCE
CARE AND CLEANING
2
Carefully remove the
o
lters from the water valves
and soak them in white vinegar or a lime scale
remover, following the manufacturer’s instructions.
Be careful not to damage the
o
lters while cleaning.
3
Rinse thoroughly before reinstalling. Press the
o
lters
back into place.
4
Before reattaching the hoses,
p
ush the hoses and
water lines by running several gallons of water
through the hoses and into a bucket or drain.
Inlet Filter
Summary of Contents for 796.4130 Series
Page 27: ......