Kenmore 796.4126 Series, Use & Care Manual

Page: 26 / 64

26
CARE AND CLEANING
MAINTENANCE (continued)
Cleaning the Drain Pump Filter
The washer is equipped with a fi lter that helps prevent excess
lint and foreign objects like buttons, keys, and coins from causing
damage to the pump. If the washer fails to drain properly,
unplug the washer and allow the water to cool, if necessary,
before proceeding.
1
Open the drain pump fi lter access panel.
Drain Hose
2
Unclip the drain hose and pull it out. Place the end
of the drain hose into a shallow pan or a fl oor
drain. Make sure not to pull the hose out too far, or
it may not drain properly.
Plug
3
Remove the plug from the drain hose, and allow the
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container several times.
Pump Filter
4
Twist the pump fi lter counterclockwise to remove.
Remove any lint and foreign objects from the pump
fi lter. Insert pump fi lter back into opening and twist
clockwise to secure. Be sure to close the drain pump
fi lter access panel.