6. Using 10mm or 13/32-inch socket wrench with 2-inch
extension, loosen the 3 bolts and remove the Bottom
Hinge from right side of housing (fig.23).
1. Using a 1/4-inch socket wrench, loosen and remove
Hinge Pin from the Middle hinge Pin Bracket.
Remove washer underneath the middle hinge and
set aside.
Note:
At this point the door will be loose, lift up
door slightly and remove it (Fig.20 and 20a).
Reverse and Reattach Refrigerator Door
Fig. 20
Fig. 20a
2. Loosen and remove the 2 bolts and the phillips head
screw to remove the Middle Hinge Bracket from
refrigerator housing (fig.21). Set parts aside.
Fig. 21
3. Remove base grill.
4. Remove the washer from the Bottom Hinge Pin
(fig.22).
5. Using a 1/4-inch socket wrench, loosen and remove
the Hinge Pin from the Bottom Hinge. Reattach the
Hinge Pin to the opposite side of the Hinge (see fig.22
and 22a).
Note:
This is easier to do while the Hinge is still
attached.
Fig.22
Fig.22a
Fig. 23
7. At this point, remove the Decorative Bolt on bottom on
refrigerator housing from the left side of refrigerator
(fig.24). You will need this hole for the Bottom Hinge.
Fig. 24
- 9 -
