3-16 AUGER MOTOR COVER
1) After removing the icemaker remove the (5) stainless
screws holding the auger motor cover, shown in the
picutres below.
2) Grip the bottom of motor cover assembly and pull out it.
3) Disconnect wire harness of motor cover assembly.
There is a auger motor on the back, as shown in the
picture.
Auger Motor
- 15 -
3-17 HOW TO REMOVE A DOOR ICE BIN
2) Lift the lower part slightly.
1) Insert the Ice Bin, slightly tilting it to avoid touching the
Icemaker. (especially, ice maker lever)
Insert the ice bucket carefully avoid contacing the
automatic shut off arm.
1
2
1) Grip the handles, as shown in the picture.
3-18 HOW TO INSERT A DOOR ICE BIN
3) Take the Ice Bin out slowly.
