8-1 FUNCTION
8-1-1 Function
1. When the appliance is plugged in, it is set to “37” for Refrigerator and “0” for freezer.
You can adjust the Refrigerator and the Freezer control temperature by pressing the ADJUST button.
2. When the power is initially applied or restored after a power failure, it is automatically set to “37” & “0”.
8-1-2 How to Change the Temperature Mode to °F / °C
1. The setting temperature mode can be changed to °F / °C by pressing and holding Freezer Temp. key of Freezer and
Refrigerator Temp. key of Refrigerator over 5 seconds. at the same time.
2. The initial setting is °F. Whenever the mode is changed, the LCD lights are changed.
8-1-3 Lock function (dispenser and display button lock)
1. In power application of refrigerator, the “LOCK” icon is turned off at the
upper side of lock graphic of display with the lock release status.
2. If desiring to lock the display the dispenser and control panel push on
the LOCK button more than 3 seconds. LOCK text is turned on at the
upper side of lock graphic of display with lock status.
3. The buzzer sound and control panel and dispenser function is not
performed even if pressing display button other than lock key in the
lock status.
4. If desiring to release the lock status and pressing the lock button more
than 3 seconds. “LOCK” icon is turned off at the upper side of lock graphic of display with the lock release status.
8-1-4 Filter condition display function
1. There is a replacement indicator icon for the water
filter cartridge on the dispenser.
2. Water filter needs replacement once six months.
3. Water filter icon turns on to tell you need to replace
the filter soon.
4. After replace the filter, press and hold the lock button
more than 3 seconds.
Then water filter light turns off with reset status.
8-1-5 Ultra Ice selection
Please select this function for prompt freezer.
• Function is repeated following below whenever pressing Ultra Ice button.
• Ultra Ice function automatically turns off if a fixed time passes.
- 29 -
8. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM
Ex) In selecting
"LOCK"
Ex) In selecting
"LOCK" again
In initial Power On
/ Filter RESET
Replace indicator
light on
Classification
Filter Status
Display
Summary of Contents for 795.77192600
Page 18: ...5 CIRCUIT DIAGRAM 18 CIRCUIT DIAGRAMS ...
Page 53: ......
