Kenmore 795.7410 Series Use & Care Manual Download | Manualshive

Page: 22 / 44

background image

USING YOUR REFRIGERATOR

INSTRUCTIONS FOR SMART GRID

IMPORTANT:

You must connect your Kenmore Smart appliance to the

internet and then register the appliance to your account

in order to use the Smart Grid function.

Consult the Quick Start Guide supplied with the

appliance for instructions on how to register your

appliance using the Kenmore Smart™ application (app).

The Smart Grid Button serves two purposes:

1) internet connection or disconnection, 2) enable or

disable/override the appliance Demand Response

capability.

NOTE:

This appliance is a connected-ready appliance,

allowing you to remotely monitor and control it from your

smart phone via the Kenmore Smart™ app.

To connect the refrigerator to the Internet:

Refer to the Quick Start Guide that came with your smart

appliance for detailed instructions on creating a Kenmore

account and setting up your appliance for connected

operation from your smart phone. This Use & Care Guide

contains information and instructions for operating

your appliance from the appliance control panel. For

additional assistance, visit http://www.kenmore.com/

smart

NOTE:

If no connection is made

after ﬁve minutes the

blinking SMART GRID button LED will turn off.

Smart Grid Operation:

Once connected and registered, the appliance is capable

of accepting a signal from your electrical company. The

signal, known as a Demand Response (DR) signal, will adjust

refrigerator operation to reduce power consumption for

a period of time ranging from a few minutes up to a

maximum of 4 hours. Ice making will be delayed during

this time. Opening the refrigerator door may cancel

certain DR signals.
The Grid Mode LED (red) will be steadily lit when the

signal is in effect. To disable the signal and prevent

further signal acceptance, press and release the Smart

Grid button. Both the Grid Mode and Smart Grid LED

will turn off. Press and release the Smart Grid button

again to enable DR signal acceptance capability. The

Smart Grid button LED will relight. The Grid Mode LED

will light when another DR signal is sent.

22

«
...
20
21
22
23
24
...
»

Summary of Contents for 795.7410 Series













































Reviews:

No comments

Related manuals for 795.7410 Series

Brand: Igloo Pages: 7

Brand: Igloo Pages: 10

Brand: Igloo Pages: 1

Brand: Igloo Pages: 1

Vitrifrigo BD50F

Brand: Danfoss Pages: 120

Brand: Thermador Pages: 28

Brand: U-Line Pages: 13

Brand: U-Line Pages: 56

Brand: Fagor Pages: 1

Brand: Cylinda Pages: 152

Brand: Dometic Pages: 32

Brand: Smeg Pages: 11

Brand: Chandler Pages: 12

Brand: U-Line Pages: 18

Brand: U-Line Pages: 12

RRTG18PABB - 18.2 Cu Ft Frost Free...

Brand: Haier Pages: 2

Brand: Haier Pages: 12

Brand: Haier Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands