Kenmore 795.7259 Use & Care Manual Download

Page: 23 / 50

USING YOUR REFRIGERATOR

SMART L ED (green):

DEFINTIONS

Notiﬁes the user that the app

iance is connected to the

internet.

Smart Grid L

ED (green):

Notiﬁes the user that the app

iance is capab

e of receiving

a signal, known as a

emand Response event, from a utility

company’s energy manag

ment system.

GRID M

ODE LE

D (red):

Notiﬁes the user that the app

iance is reducing or delaying

energy use based on the signal received

rom a utility

company energy manag

ment system. The LED will remain

illuminated during critical peak pricing (CPP) and real time

pricing (RTP) or during a high demand for electricity.

GETTING CONNECTED
You need the following d

vices and app

ication to use the

Smart Grid and other smart features on your refrigerator.
Required Devices

A wireless router, Kenmore Elite Smart

Refrigerator, and a mobile device.
Required Application

Kenmore Smart App.

SMART FEATURES

OVERVIEW

Kenmore Smart connectivity transforms your relationship with

your home. You can personalize the way Kenmore Smart

products operate based on your schedule and da

ly routines,

making life easier and p

oviding g

eater peace of mind. It

does this by letting you link with and manag

your Kenmore

Smart products on one app, all from trusted b

ands, from a

smart phone, tablet or computer.
This app

iance is a connected-ready app

iance, allowing you

to remotely monitor and control it from your smart phone via

the Kenmore

Smart app

To get started, you will need the following:
•

Kenmore Elite

Smart Appliance

• WI-FI home router connected to the internet

• Smart phone

• Kenmore Smart app

For more information about your Kenmore Elite

Smart

appliance, please visit www.Kenmore.com/smart.
The Smart Grid function controls energy usage which helps

you save energy during peak usage periods. You can override

the SMART GRID function at any time (using the Smart Grid

button or application).
Smart Grid responds to notification events from your

utility company to run high energy-consuming tasks only

during off-peak times when electrical demand is lower.

These notification events are known as Demand Response

(DR) signals. If the refrigerator receives a DR signal from

the utility company, the refrigerator will turn on the GRID

MODE LED on the refrigerator control panel and regulate

power consumption according to the signal received. The

refrigerator will respond to the signals received from the

utility company as long as the appliance is connected to the

internet and Smart Grid is enabled.

Summary of Contents for 795.7259



















































Search results

Summary of Contents for 795.7259

Reviews:

Related manuals for 795.7259

Brands by name

Popular brands

Kenmore 795.7259, Use & Care Manual

Search results

Summary of Contents for 795.7259

Reviews:

Related manuals for 795.7259

Brands by name

Popular brands