- 10 -
3-12 SUB PWB FOR WORKING DISPENSER
1) Loosen the screw on the sub PWB.
2) Pull the sub PWB down.
3) Disconnect the wire harness and replace the sub PWB in
the reverse order of removal.
3-9 DISPENSER
1) Disconnect funnel by pulling
down and forward.
3-10 DISPLAY PWB REPLACEMENT
1) Pull up and out on the dispenser cover to remove and
replace PWB with dispenser cover.
2) Follow the steps in the pictures.
3-11 FUNNEL REPLACEMENT
1) Pull up and out on the dispenser cover to remove.
2) Remove 2 screws.
3) Disconnect the wire harness.
4) Replace in reverse order.
3) Hold the bottom side of the
“Cover Assembly, dispenser”
as shown in the picture, and
pull and remove it. The cover
dispenser is attached with a
hook.
CAUTION:
When replacing the dispenser cover in the
reverse order of removal, be careful that the lead wire
does not come out and the water tube is not pinched by
the dispenser cover, as shown in the picture below.
3) Use a flat blade screwdriver
at bottom side hole of the
“Cover Assembly dispenser”
to detach hooks of the bottom
side.
Appliantology.org
