manualshive.com logo in svg

Kenmore 795.7035, Use & Care Manual

Share
Download
Kenmore 795.7035 Use & Care Manual Download Page 10

10

 WARNING

Excessive Weight Hazard:

Use two or more people to move and install the 

refrigerator. Failure to do so can result in back or 

other injury.

UNPACKING yOUR REFRIGERATOR 

Remove tape and any temporary labels from your 

refrigerator before using. Do not remove any warning-

type labels, the model and serial number label, or 

the Tech Sheet that is located under the front of the 

refrigerator.
To remove any remaining tape or glue, rub the area 

briskly with your thumb. Tape or glue residue can also 

be easily removed by rubbing a small amount of liquid 

dish soap over the adhesive with your fingers. Wipe with 

warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable 

fluids, or abrasive cleaners to remove tape or glue. These 

products can damage the surface of your refrigerator. 
Refrigerator shelves are installed in the shipping position. 

Please reinstall shelves according to your individual 

storage needs.

REFRIGERATOR INSTALLATION

 WARNING

Excessive Weight Hazard:

Your refrigerator is heavy. When moving the 

refrigerator for cleaning or service, be sure to protect 

the floor. Always pull the refrigerator straight out 

when moving it. Do not wiggle or walk the refrigerator 

when trying to move it, as floor damage could occur.

 WARNING

Explosion Hazard:

Keep flammable materials and vapors, such as 

gasoline, away from the refrigerator. Failure to do so 

can result in fire, explosion, or death.

Summary of Contents for 795.7035



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands