Kenmore 795.6800 Series Use & Care Manual Download Page 4

4

PROTECTION AGREEMENTS

PRODUCT RECORD

Master Protection Agreements

Congratulations on making a smart purchase. Your new 

Kenmore

®

 product is designed and manufactured for 

years of dependable operation. But like all products, 

it may require preventive maintenance or repair from 

time to time. That’s when having a Master Protection 

Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend

the life of your new product. Here’s what the

Agreement* includes:

• 

Parts and labor

 needed to help keep products 

operating properly 

under normal use,

 not just defects. 

Our coverage goes 

well beyond the product warranty.

 

No deductibles, no functional failure excluded from 

coverage— 

real protection.

• 

Expert service

 by a force of more than 

10,000 

authorized Sears service technicians,

 which means 

someone you can trust will be working on your product.

• 

Unlimited service calls and nationwide service,

 as 

often as you want us, whenever you want us.

• 

“No-lemon” guarantee

 – replacement of your covered 

product if four or more product failures occur within 

twelve months.

• 

Product replacement

 if your covered product can’t be 

fixed.

• 

Annual Preventive Maintenance Check 

at your request 

– no extra charge.

• 

Fast help by phone

 – we call it 

Rapid Resolution

 

– phone support from a Sears representative on all 

products. Think of us as a “talking owner’s manual.” 

• 

Power surge protection

 against electrical damage due 

to power fluctuations.

• 

$250 Food Loss Protection

 annually for any food 

spoilage that is the result of mechanical failure of any 

covered refrigerator or freezer.

• 

Rental reimbursement

 if repair of your covered 

product takes longer than promised.

• 

10% discount

 off the regular price of any non-covered 

repair service and related installed parts.

Once you purchase the Agreement, a simple phone call 

is all that it takes to schedule service. You can call at 

any time day or night, or schedule a service appointment 

online.

The Master Protection Agreement is a risk free purchase. 

If you cancel for any reason during the product warranty 

period, we will provide a full refund or a prorated refund 

anytime after the product warranty period expires. 

Purchase your Master Protection Agreement today!

Some limitations and exclusions apply.

For prices and additional information in the  

U.S.A. call 1-800-827-6655.

* Coverage in Canada varies on some items. For full 

details call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, 

garage door openers, water heaters, and other major 

home items, in the 

U.S.A. or Canada call  

1-800-4-MY-HOME

®

.

In the space below, record the date of purchase, model and serial number of your product. You will find the model and 

serial number printed on an identification label located on the interior liner of the refrigerator compartment. Have these 

items of information available whenever you contact Sears concerning your product.

Model No.___________________ 

 

   Date of Purchase ___________________

Serial No.___________________

Save these instructions and attach your sales receipt for future reference.

Summary of Contents for 795.6800 Series








































Reviews: