31
Setting Oven Controls
Setting Recipe Recall
This feature will only recall a bake, convection bake, convection
roast, slow cook, or cook time. This feature will not work with
any other function. One recipe can be saved for each oven.
To program the oven to begin baking immediately and record a
recipe (Bake at 425°F):
1.
Select Upper or Lower oven. Press Bake.
2. Press 4 2 5.
3. Press and hold START until a beep indicates that the recipe
has been recorded for future recall. If you do not wish to
continue cooking at this time press STOP.
To begin baking using a stored recipe:
1.
Press UPPER or LOWER oven.
2. Press Bake or any other function where recipe has been
saved and then press
.
3. Place food in oven.
4. The temperature (and cook time if programmed) is recalled,
the oven will begin cooking the recorded recipe.
Restoring Factory Default Settings
Your appliance is programmed with default control settings.
Over time, the following options may have been changed since
the appliance was new. If you choose to restore default settings,
all user preferences will be restored to their original settings.
•
12 or 24 hour display mode
•
Continuous Bake or 12 Hour Energy Savings mode
•
Silent or audible control
•
Oven temperature display (Fahrenheit or Celsius)
•
Oven temperature adjustments (UPO)
•
Stored recipes
•
Meat Probe setting
•
Accent Light setting
To restore oven control to factory default settings:
1.
When the oven is in idle and no cooking function is in oper-
ation, press and hold the 7 key until the acceptance tone
sounds (about 6 seconds).
2. Press START. The control is now reset to default settings.
Adjusting Oven Temperature
The temperature in the oven is pre-set at the factory. Before
adjusting, be sure to follow recipe times and temperatures. Test
a recipe by using a temperature setting higher or lower than the
recommended temperature.
Important: Do not use thermometers such as those found in
grocery stores to check the temperature settings inside the oven.
These thermometers may display temperatures that vary greatly
from the actual temperature.
The baking results should help you to decide how much of an
adjustment is needed. If you think the oven is cooking too hot or
too cool, you can adjust the actual oven temperature to be 35°F
(19°C) more or 35°F less than the default setting of 0.
To adjust the oven temperature higher by 30°:
1.
Press Broil for 6 seconds. UPO 0 will appear in the display.
2. Press the numeric keypad 3 0.
3. Press
to accept the new temperature change offset or
press STOP to reject the change if necessary.
To adjust the oven temperature lower by 30°:
1.
Press Broil for 6 seconds. UPO 0 will appear in the display.
2. Press the numeric keypad 3 0.
3. Press the Self Clean key to change the 30 to a
-
30. By
pressing Self Clean the value will change from plus to minus
or from minus to plus.
4. Press
to accept the temperature change offset or
press STOP to reject the change if necessary.
