12
Induction Cooking Zones
Cooktop Display Windows
The range backguard provides a digital window for each of the
cooking zones located on the cooktop. Power levels and
messages are easily monitored and controlled using the window
displays in combination with the corresponding control knobs.
Available Power Level Settings
The cooktop control (
Figure 8
) will display power levels ranging
from Pb (
Figure 9
), Hi (
Figure 13
) to Lo (
Figure 10
).
The settings between 9.5 (
Figure 14
) and 1.5 (
Figure 15
) decrease
and increase in 0.5 increments.
Use
Table 1
to determine the correct power level setting for the
type of food you are preparing.
Power Boost Power Level (Pb)
When setting an induction cooking zone for the highest setting
(to the POWER BOOST position), the display will initially show
Pb (Power Boost) power level for up to 10 minutes. After 10
minutes, the cooking zone will automatically return to the Hi
setting (See
Figure 13
). The Pb setting is only available immedi-
ately after activating a cooking zone by turning the knob to the
highest setting (to the POWER BOOST position).
Hot Surface Window Message (HE)
After using an induction cooking zone, the cooktop may become
very hot. After turning any cooking zone off, the cooktop may
remain hot for some time. The corresponding Hot Element (HE)
message will remain on until the cooktop has cooled (See
Figure 12
).
ESEC Error Indicator Message (Er)
An error message will be displayed (flashing Er) (
Figure 11
) at
power up (or after a power failure) if any of the surface control
knobs were left in the ON positions. If a power failure should
occur, be sure to set all of the four surface control knobs to the
OFF position. This will reset the surface controls.
Be sure to reset the clock by referring to the
“Setting Clock”
heading on
page 17
. Once the surface controls have been set to
the OFF positions and the clock has been set with the correct
time of day, the surface controls should return to normal opera-
tion. If the surface controls do not function and the Er message
remains in any display after following these procedures, contact
an authorized servicer for assistance.
Lockout Window Message (- -)
The (- -) message will appear whenever the Lockout, Self-clean
or Sabbath feature is active (See
Figure 16
). Refer to the
“Setting Oven Lockout”
heading on
page 19
for more details.
Important:
The induction cooking zones will not operate when the oven is
set for Sabbath mode. For more details on the Sabbath feature,
see the
“Setting the Sabbath Feature (for use on the Jewish
Sabbath and Holidays)”
heading on
page 26
.
Figure 8: Cooktop control knobs
Figure 9:
Figure 10:
Figure 11:
Figure 12:
Figure 13:
Figure 14:
Figure 15:
Figure 16:
Summary of Contents for 790.9507 Series
Page 42: ...42 Before You Call ...
Page 43: ......
