background image

34

Care and Cleaning

Cleaning Various Parts of Your Appliance

Before cleaning any part of the oven, be sure all controls are turned off and the oven is cool. Remove spills and any heavy soiling as 
soon as possible. Regular cleaning will reduce the difficulty and time of major cleaning later.

Surface Type

Recommendation

Control knobs

 

Painted body parts

 

Painted decorative trim

 

Aluminum, plastic, or vinyl trim

For general cleaning, use hot soapy water and a cloth. Dry with a clean cloth. For more 
difficult soils and build-up grease, use a soft cloth and clean with mild dish detergent and 
water or a 50/50 solution of vinegar and water. Follow by rinsing the area with clean water; 
dry and polish with a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. 
Do not spray liquids directly on the oven control and display area. Do not use large amounts 
of water on the control panel. Excess water on the control area may cause damage to the 
appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads, or paper 
towels. They will damage the finish.

Control panel

 

Control keypad membrane

 

Decorative trim (some models)

Before cleaning the control panel, turn all controls off and activate oven lockout (on some 
models). Do not use abrasive cleaners on any of these materials; they can scratch. Clean 
using hot, soapy water and a cloth or sponge. Be sure to squeeze excess water from cloth or 
sponge before wiping control panel, especially when wiping around the controls area. Excess 
water in or around the controls may cause damage to the appliance. 

Porcelain enamel parts

Gentle scrubbing with a soapy non-abrasive scouring pad will remove most spots. Rinse with 
a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an 
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp 
cloth, and then scrub with a soap-filled non-abrasive scouring pad. Rinse and wipe dry with a 
clean cloth. Do not allow food spills with high sugar or acid content (milk, tomatoes, sauer-
kraut, fruit juices, or pie filling) to remain on the surface; they may cause a dull spot even 
after cleaning.

Oven interior

Remove excessive spillovers from oven cavity bottom before starting Self Clean. Clean any 
soils from oven frame and door liner outside the oven door gasket. For very important 
cleaning precautions, be sure to read all the instructions on 

“Clean” 

on 

page 32

.

Porcelain coated oven racks

This model comes with lubricated porcelain oven racks, which can remain in the oven during 
the self-clean cycle. Do not clean this vegetable oil lubrication off the racks. It is important 
that the sides of the oven racks always have a light coating of vegetable oil. To maintain 
optimal rack performance, re-apply a thin layer of vegetable oil to the sides of the rack after 
every self-clean cycle or when the rack becomes difficult to slide.

For instructions on how to care for your Glide Racks, see 

“Caring for Your Porcelain Enameled 

Glide Rack” 

on 

page 37

.

Oven door

Use soap and water to thoroughly clean the top, sides, and front of the oven door. Rinse well. 
You may use a glass cleaner on the outside glass of the oven door. Do not immerse the door 
in water. Do not spray or allow water or the glass cleaner to enter the door vents. Do not use 
oven cleaners, cleaning powders, or any harsh abrasive cleaning materials on the outside of 
the oven door.

Ceramic cooktop

Do not use spray oven cleaners on the cooktop. See 

“Cooktop Cleaning” 

 and 

“Cooktop 

maintenance” 

on 

page 35

.

Stainless Steel (some models)

Always rub in direction of metal grain to avoid damaging. Do not use cleaners with high 
concentrations of chlorides or chlorine. Do not use harsh scrubbing cleaners. Polish with a lint-
free cloth. Always be sure to wipe excess cleaner/polish off from the metal surface as bluish 
stains may occur during future oven heating that cannot be removed. Clean heavier soils with 
hot, soapy water and a cloth or sponge. Rinse and dry using clean water and a cloth.

Summary of Contents for 790.9258














































Reviews: