background image

25

Oven Controls

Steam Clean

Steam cleaning works best for spot cleaning and light soils on 
the oven bottom. 

Steam clean may also be used before manu-

ally cleaning the oven.

 Do not set the cleaning temperature higher than 

the temperature listed in these instructions. Higher temperatures 
will dry the steam too soon and may lead to burns or serious 
injury when cleaning.

 Do not attempt to wipe out the oven before the 

cooling off period or attempt to shorten the cooling off period. 
Doing so may lead to burns or other serious injury when 
cleaning.

 Do not add ammonia, oven cleaners, or any 

other household cleaners or chemicals to the water used for 
steam cleaning. 

To set the controls for steam clean:

1.

Oven should be at room temperature. Remove all racks and 
oven accessories.

2.

Scrape or wipe loose debris from the oven bottom. 

3.

Pour 8 oz (235 ml) of distilled or filtered water onto the 
oven bottom (See 

Figure 17

). Close the oven door.

 

4.

 Press 

Bake

. Enter 

170ºF (77ºC)

 using the arrow keys

5.

Set the minute timer for 

20 

minutes. 

 

6.

Allow the oven to heat. Do not open the oven door while the 
oven is heating. 

7.

An alert will sound when the timer is finished. Press 

Timer 

ON/Off

 to stop the timer and press 

 to return to the 

clock.

8.

Set the minute timer for 

10 

minutes to allow for a cool-down 

period. Do not attempt to wipe out the oven before a 10 
minute cool-down period.

9.

An alert will sound when the timer is finished. Press 

Timer 

ON/Off

 to stop the timer.

10.

Stand to the side of the range out of the way of escaping 
vapor 

when opening the oven door. 

11.

Wipe oven cavity and bottom. Do not clean oven door gas-
ket 

(See 

Figure 18

).

 

To stop the steam cleaning cycle at any time, press

 . 

Important notes:

Always stay close to the oven when steam cleaning, so you 
can hear the timer alert.

For best results, wipe out oven immediately after the cool-
down period is complete.

Removal of especially stubborn or baked-on soils may 
require a manual cleaning.

Some condensation or water vapor may appear close to 
the oven vent, and some water may remain on the oven 
bottom. This is normal. Wipe with a soft cloth or sponge 
when the cool-down period is complete.

The oven gasket may become damp; do not wipe dry. 
Open door to broil position and allow to air dry.

Local water sources often contain minerals (hard water) and 
will leave deposits on the oven cavity surfaces. If this occurs, 
wipe cavity surfaces with diluted vinegar or lemon juice. 
Use distilled or filtered water.

If the door is opened during steam cleaning or cool-down 
period, steam will escape and the oven may be more 
difficult to clean. Keep oven door closed during steam 
cleaning.

Figure 17:  Pour water onto the oven bottom

STOP

STOP

Figure 18:  Do not clean the oven door gasket

STOP

STOP

Summary of Contents for 790.7443 Series


































Reviews: