18
Self-Cleaning
(All upper oven, some lower oven)
What to Expect during Cleaning:
While the oven is in operation, the oven heats to temperatures much higher than
those used in normal cooking. Sounds of metal expansion and contraction are
normal. Odor is also normal as the food soil is being removed. Smoke may appear
through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame and cause
more smoke and odor than usual. This is normal and safe and should not cause
alarm. If available, use an exhaust fan during the self-cleaning cycle.
Self-Clean Cycle time length
For satisfactory results, use a 2 hour Self-Clean cycle for
light soils
and a 3 hour
cycle for
average
or a 4 hour cycle for
heavy soils. NOTE:
The kitchen area
should be well ventilated using an open window, ventilation fan or exhaust hood
during the Self-Clean cycle. This will help eliminate the normal odors associated
with the Self-Clean cycle.
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.
DO NOT
force the
oven door open. This can damage
the automatic door locking system.
Use caution and avoid possible
burns when opening the door after
the Self-Cleaning cycle has
completed. The oven may still be
VERY HOT.
To Set the Controls for a Self-Clean Cycle or a Delayed Start Self-Clean Cycle:
(
Note:
If you do not want to start a
Delayed
Self-Clean Cycle, skip steps 2 & 3.)
1.
Be sure that the clock is set with the correct time of day and the oven door is closed.
2.
Press
Delay
Start
.
"DELAY"
will flash.
3.
Press and hold the
pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the
desired time is displayed.
4.
Press
Select
Clean
. "— — —" appears in the display.
5.
Press the
or
once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press
.
"2:00" appears in the display or to select a 4 hour cycle press
. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCKED"
indicator light will appear.
DO NOT
open the oven door while the light is flashing (it takes about 15 seconds for the
oven door to lock).
6.
"
CLn
" will appear in the display during the Self-Clean cycle and the "DOOR LOCKED" light will glow until the Self-
Cleaning cycle is complete or cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1.
The time of day or "
End
" will appear in the display window and the "Clean" and "DOOR LOCKED" light will continue
to glow.
2.
Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can
be opened.
3.
If "
End
" is in the display and the Select Clean indicator light remains ON, press
STOP
Clear
. The time of day will appear in
the display.
NOTE:
When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1.
Press
STOP
Clear
.
2.
Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can
be opened.
3.
Restart the Self-Clean cycle once all conditions have been corrected.
